10mL Glass Sample Bottle with Screw Plastic Cap and PE Pad, 22x52mm (Pack of 100)

10mL Glass Sample Bottle with Screw Plastic Cap – Borosilicate, Pack of 100

If your samples can’t afford contamination, start with the bottle. This 10mL glass sample bottle with screw plastic cap is made from Type 1 borosilicate glass — the lab standard for chemical and thermal resistance. The 22mm screw cap comes with a PE pad that seals tight against evaporation and leaks. You get 100 bottles in a clean, dust-free pack, ready for the shelf.

Key Features and Benefits

Every detail of this 10mL glass sample bottle with screw plastic cap protects your sample. Here is what you get:

1. Type 1 borosilicate glass: Resists acids, solvents, and thermal shock far better than ordinary soda-lime glass. Your samples stay uncontaminated.
2. Leak-proof PE pad seal: The 22mm plastic screw cap presses a polyethylene pad flat against the bottle mouth — no evaporation, no leaks, no odours escaping.
3. True 10mL capacity: Holds a full 10 millilitres in the standard 22x52mm lab footprint. Big enough for reagents, compact enough for crowded benches.
4. Crystal-clear walls: Read sample level, colour, and clarity at a glance without opening the bottle.
5. Bulk pack of 100: Clean, dust-free packaging keeps every bottle ready to use and brings the per-bottle cost down.

Technical Specifications

The key numbers for this 10mL glass sample bottle with screw plastic cap at a glance:

Sample Bottle or Scintillation Vial — Which Do You Need?

Buyers often search both terms. Here is the honest difference:

1. Standard scintillation vials: 20mL (28x61mm) in potassium-free glass, built for the lowest possible background counts. Buy these when your protocol demands certified LSC vials.
2. 10mL glass sample bottle with screw plastic cap: Type 1 borosilicate glass in the 22x52mm footprint with a PE pad seal. The practical choice for storage, QC, and routine counting work — far more economical per sample than certified LSC vials.

Where Saudi Labs Use These Bottles

From Dammam’s industrial labs to university research benches, these 10 mL glass vials with caps show up everywhere:

1. Liquid scintillation counting: Low-background borosilicate glass suits routine radioisotope sample prep and counting work.
2. Pharma and chemical QC: Store raw materials, intermediates, and finished-product samples without contamination risk.
3. Environmental testing: Inert glass keeps water and soil samples stable from collection to analysis.
4. General lab storage: Reagents, standards, and reference solutions stay sealed and clearly visible.

How to Handle and Store

Glass rewards a little care:

1. Screw the cap on until snug — overtightening can damage the PE pad and ruin the seal.
2. Inspect each bottle for cracks or chips before filling, especially for valuable samples.
3. Label with a permanent marker or lab label before filling, not after.
4. Store upright in a cool, dry place away from direct sunlight.
5. These 10ml glass vials with screw caps are reusable: wash, dry, and inspect before refilling.

Key Safety Advantages

This 10mL glass sample bottle with screw plastic cap protects your work and your people:

1. Chemically inert: Borosilicate glass doesn’t react with most lab chemicals, so samples stay pure and analysts stay safe.
2. Leak-proof seal: The PE pad stops spills of hazardous liquids in storage and transit.
3. Thermal shock resistance: Borosilicate handles rapid temperature changes that would crack ordinary glass.
4. Consistent dimensions: Every bottle in the 100-pack shares the same 22x52mm footprint, so racks and handling stay uniform.

Precautions & Safety Protocols

A minute of care prevents broken glass and ruined samples:

1. Handle with care: Glass breaks. Protect bottles from knocks, and never use a cracked vial for valuable or hazardous samples.
2. Check chemical compatibility: Borosilicate resists most chemicals, but verify against very aggressive media such as hydrofluoric acid or hot concentrated alkalis.
3. Don’t overtighten: Snug is sealed; forced is damaged. Replace caps whose PE pads look worn.
4. Dispose of broken glass properly: Use designated broken-glass containers, never general waste.

Frequently Asked Questions

1. What is the difference between these and standard 20mL scintillation vials?
   Standard LSC vials are 20mL (28x61mm) in potassium-free glass for the lowest background counts. These are 10mL general-purpose bottles in Type 1 borosilicate — ideal for smaller volumes, storage, and routine counting work, and more economical per sample.
2. Are these 10 mL glass vials with caps suitable for autosamplers?
   No. These are for general storage and manual work. For autosamplers you need our 2mL autosampler vials.
3. Do the bottles come with caps?
   Yes. Every 10 mL glass bottle with cap ships with the 22mm plastic screw cap and PE pad fitted — ready to use out of the pack.
4. What does 22x52mm mean?
   The bottle body is 22mm in diameter and 52mm tall — the standard 10mL lab footprint that fits common vial racks and handling trays.
5. Can I reuse these bottles?
   Yes. Wash with a suitable lab detergent, rinse thoroughly, dry completely, and inspect for cracks before refilling. Replace any cap whose PE pad looks worn.
6. Why borosilicate glass instead of ordinary glass?
   Type 1 borosilicate resists chemical attack and thermal shock far better than soda-lime glass, so samples stay pure and the bottles survive lab life.
7. How do I get a quote for delivery in Saudi Arabia?
   Contact AskA Solution directly. We keep the 10mL glass sample bottle with screw plastic cap in local stock and deliver fast to Riyadh, Jeddah, Dammam, Jubail, and Yanbu.

Need a 10mL glass sample bottle with screw plastic cap in bulk? AskA Solution stocks them in packs of 100, ready for rapid delivery across Saudi Arabia. Get in touch for a competitive quote today.