+966 59 204 1946
No products in the cart.
Smell sewer gas in your building and nobody can find where it comes from? Or building something new and need the drains tested before handover? We are a sewer odour detection company that finds the exact source with safe tracer smoke, usually within a few hours. No breaking walls. No guessing.

Welcome to AskA Drain & Odor Detection: We uphold the highest standards of professionalism in delivering industrial drain smoke testing and sewer odor detection to facilities across Saudi Arabia. Our commitment to precision diagnostics protects your people, your property, and your project timelines.Sewer gas is more than a bad smell, it carries hydrogen sulfide (H2S), methane and ammonia. It causes headaches and nausea for your staff, corrodes equipment, and signals a drainage defect that only gets worse. And on new construction, one hidden leak can hold up your municipal sign-off for weeks.
A plumbing smoke test service is a diagnostic check where safe, non-toxic tracer smoke is blown through your drain, waste and vent (DWV) system at low pressure. The smoke follows the same path as escaping sewer gas, so wherever smoke appears, a cracked vent, a dry trap, a broken seal, that is exactly where odours are entering your building. It proves air-tightness in hours, without breaking walls, and it is accepted for inspection sign-off.
Non-Toxic & Safe: Tracer smoke that is safe for people, equipment and air-conditioning systems. No stains, no smell left behind.
No Demolition: We find the exact leak point, so your team opens one small area — not the whole building.
Proof You Can File: Every visit ends with a photo report marked locations and prioritized repair advice for your QA/QC file.
Seven services, one goal: find your leak and prove it. Find the one that matches your problem, or tell us what is happening and we will point you to the right one.
Our main service. Your whole network, checked at once.
This is the service everything else is built on. We seal your cleanouts and roof vents, then pump safe, non-toxic tracer smoke through your sewer lines at low pressure. The smoke fills every pipe, trap and vent, then escapes through every crack, gap and failed seal. You watch it live and get photos of every leak point, and you know exactly what to fix and where.

The test your inspector trusts.
A water test only checks the low parts of your pipes. It misses the vents and upper joints, and that is exactly where smells escape. Our plumbing smoke test service checks the full DWV system, drain, waste and vent, for air leaks. Book it before handover or sign-off, or any time you need proof your system is sealed. Consultants and inspectors across Saudi Arabia accept it.

H2S is not just a smell. It is a warning.
Sewer gas carries hydrogen sulfide (H2S), methane and ammonia. In your plant or building, that means headaches for your people and corrosion on your equipment, and a defect that only gets worse. Our sewer gas leak detection finds where the gas enters, with tracer smoke and calibrated gas detectors. You get the entry point marked and a report your HSE team can act on.

Buried lines. Found without digging.
Your underground pipes run between buildings and under roads, out of sight. When one leaks, you get odors or wet patches, and blind digging costs a fortune. Our underground pipe leak detection services trace buried lines from manhole to manhole, including the tie-in to the municipal network. We mark the leak location on the surface, so your excavation opens one spot, not a trench.

Storm drains leak too. We find those as well.
Drainage networks carry rainwater and surface water away from your site, and when they leak, water goes where it should not: under slabs, into basements and around foundations. Our drainage leak detection tests your storm drains, catch basins and surface drainage lines for cracks and open joints. You protect your buildings from water damage and keep your site compliant with drainage requirements.

Leaks under your floor, found without tearing it up.
Some drain leaks hide under your concrete slab, in a warehouse floor or a slab-on-grade plant room, quietly letting sewer gas and moisture through. Our plumbing slab leak detection isolates the under-slab section and proves exactly where the break is. Your repair team then cuts one surgical opening instead of tearing up the whole floor. You save days of downtime and a huge repair bill.

Two tests. One visit. Total proof.
When wastewater or effluent is escaping from your sanitary sewer, you need two answers: where it leaks, and if it holds liquid. Our sewage leak detection finds the break with tracer smoke, and our hydrostatic testing fills the line with a water column to prove it is liquid-tight. You get both answers in one visit: the leak location plus a pressure-test record for your QA/QC file.

A plumbing leak smoke test pushes safe, non-toxic smoke through your complete drainage and vent (DWV) system at low pressure, so every leak, open joint, uncapped end, and dry trap shows itself in a single visit.
We study your drainage layout, agree the test zones with your team, and plan safety steps like detector isolation.
We cap the roof vents and pump low-pressure, non-toxic smoke into your drain lines until every pipe and trap is filled.
Our team walks the building and marks each spot where smoke escapes. This is sewer line smoke testing done live, in front of you.
Full report with photos and repair advice within 3 working days. Want us to verify the repairs? We re-test.
Projects Completed
Years of Experience
Expert Team Member
Client Satisfaction %
As an ARAMCO approved sewer odor detection company, we hold ourselves to the standard your QA/QC team expects.
We serve plants, commercial buildings and construction projects. No home callouts, no divided attention.
Most sewer line smoke testing visits finish in 1 to 3 hours. Your problem moves from mystery to repair plan the same day.
Every finding is marked on site, photographed, and delivered in a report your engineers can act on immediately.
You agree the SAR price before we mobilize. No surprises, no open-ended billing, ever.
We would rather tell you this now than sell you the wrong test.
Pressurized water lines: smoke testing is for gravity drains and vents, not pressurized supply pipes. Those need pressure testing.
Heavily blocked drains: if the line is fully blocked, clear it first (we can arrange high-pressure jetting) so the smoke can travel.
Open construction sites: on buildings still under active construction with open pipe ends everywhere, wait until the network is closed up.
Not sure which test your case needs? Whatsapp on +966 59 582 1377 and we will tell you honestly.
We bring our drain smoke testing service to the most demanding industrial and commercial sectors in the Saudi Arabia.
Shutdown and turnaround testing for oil plants and accommodation facilities.
Pre-handover DWV testing and full QA documentation for new buildings.
Smoke and odor tracing for factories, warehouses and food plants.
Full drainage system checks for power plants and electrical substations.
Drain smoke testing for port facilities, vessels and marine buildings.
Subcontracted smoke testing and reporting for EPC and MEP contractors.
Every method has its place. Here is how sewer line smoke testing compares for drain and sewer networks, so you choose with confidence.
| Method | What it finds | Best for | Limitation |
|---|---|---|---|
| Sewer line smoke testing | Air leaks across the whole network at once: vents, traps, joints, cracks | Odor tracing and pre-handover verification | Needs the system sealed; not for pressurized water lines |
| CCTV drain survey | Visual defects inside accessible pipes: cracks, roots, blockages | Checking pipe condition and blockages | Camera can’t see vent stacks or leaks behind walls |
| Hydrostatic testing for sewer lines | Water leaks at low points under a water column (exfiltration check) | Proving buried lines are liquid-tight | Misses air leaks in vents and upper joints; slower to set up |
Our drain smoke testing service covers the Kingdom from two home bases, with mobile teams that travel to your site.
Our head office and main workshop on King Saud Street, Al-Jalawiyah. Fastest response across the Eastern Province for drain leak detection and sewer odor detection.
Same-day mobilization for commercial towers and compounds dealing with persistent sewer odor problems.
Shutdown and turnaround testing for petrochemical plants, plus new construction sewer leak tests for expanding facilities.
Our second base covers the Central Region: pre-handover inspection support for contractors and odor investigations for commercial buildings.
Sewer odor detection for hotels, malls and commercial properties across the Western Province.
Industrial drain testing for the Yanbu industrial zone, scheduled around your plant operations.
AskA Solution – Awad Sahiman Kmshee Al Anzi Trading Est.
King Saud Street, Al-Jalawiyah, Dammam 32246, Saudi Arabia
Phone: +966 59 204 1946 · +966 59 582 1377 · WhatsApp
Real feedback from the industrial clients we serve across Saudi Arabia.
Conclusion:
At AskA Solution, we do one thing really well: we find drain leaks and sewer smells that nobody else can find. We are an ARAMCO-approved sewer odor detection company with certified engineers, modern tracer-smoke equipment and safety procedures your HSE team will approve of. If you have a smell you cannot trace, or drains that need testing before handover, talk to us first. You will get a clear answer with photos, a fixed SAR price before we start, and a team that shows up on time.
Tell us what is going on at your facility. An engineer will call you back within one working day with next steps and a fixed SAR price.
Whether you need a fixed-price quote, technical advice, or support on an ongoing job — describe what’s going on and an engineer will get back to you within one working day.
Engineers, not salespeople your enquiry is handled by the technical team.
Fixed SAR pricing — agreed in writing before any work starts.
All of Saudi Arabia — Dammam, Al Khobar, Jubail, Riyadh, Jeddah & beyond.
Attach photos or documents — it gets you a faster, accurate response.
FOLLOW US
Whether it is a sewer smell nobody can trace, a suspected sewage leak, or drains waiting for handover testing, our team is ready. We will plan the test, give you a fixed price, and find the source. Anywhere in Saudi Arabia.
Quick answers to the questions we hear most from facility managers and contractors.
How does drain smoke testing find the source of a sewer smell?
We seal your drains and push safe, non-toxic smoke through them at low pressure. The smoke takes the same path the sewer gas takes. So wherever you see smoke coming out, a cracked vent, a dry trap or a broken seal, that is exactly where the smell (odour) is getting in. A sewer line smoke testing visit usually shows results
within minutes.
What does a plumbing smoke test service check?
The full DWV system: drains, waste pipes and vent stacks. Unlike a water test, which only checks the low parts of the pipes, the smoke test proves air-tightness everywhere, including vents and upper joints. It is the check consultants and inspectors ask for before handover sign-off, in line with the Saudi Building Code.
Is sewer gas leak detection safe for a running plant?
Yes. The tracer smoke is non-toxic and leaves no residue, and our gas detectors only measure, they do not disturb anything. For sensitive or round-the-clock areas, we follow confined-space procedures and schedule the work during a shutdown, after hours, or on weekends coordinated with your safety team.
Can you find leaks in underground pipes without digging?
Yes. Our underground pipe leak detection services trace buried sewer lines from manhole to manhole and test the tie-in to the municipal network. We mark the leak location on the surface, so your excavation opens one spot instead of a trench.
What is hydrostatic testing sewer lines, and how is it different from smoke testing?
Hydrostatic testing sewer lines means sealing the section with test plugs, then filling it with a water column to prove it holds liquid, the standard exfiltration check for buried lines. Smoke testing finds air leaks across the whole network at once, vents, traps, joints and cracks, which makes it ideal for odor tracing. For a complete answer, we often do both in one visit.
How much does a plumbing smoke test cost in Saudi Arabia?
Every site is different, so we quote a fixed price after a short call about your building’s size and the problem. The quote is in SAR and agreed before we start. No surprises, no open-ended billing.
Do you detect slab leaks under our warehouse floor?
Yes. Our plumbing slab leak detection isolates the under-slab drain section and proves exactly where the break is. Your repair team then cuts one surgical opening instead of tearing up the whole floor, which saves days of downtime.
Which areas in Saudi Arabia do you serve?
We are based in Dammam and Riyadh, and our mobile teams travel across the Kingdom, including Al Khobar, Jubail Industrial City, Jeddah and Yanbu. For clients with several sites, we plan the testing across all locations.
Do you work on private homes?
No. We are an industrial and commercial services provider. Our work is for industrial plants, commercial buildings, new construction projects and institutions, not private homes.
What do we get after the test?
A full report with photos of every leak we found, the exact locations marked, and repair advice listed in order of urgency. You can use it for your QA/QC file or your handover documents.
Practical guides on industrial drainage, leak detection and sewer maintenance in Saudi Arabia.
We have received your inquiry and our team will review your requested items and get back to you as soon as possible.